Wassim SAÏD
Piping & Mechanical Engineer / Commissioning Engineer
33 years old
Driving License
Tunis (2083) Tunisia
Employed
Available
Commissioning Engineer
Alpha Engineering International
Since 2016
- Project: Construction of New Pipeline from Guebiba Station to CFTP
Company: AEC/TPS - Tunisia 2017
- Status Index & SubSystems Boundaries Elaboration
- Pre-Commissioning and Commissioning Procedure Elaboration
- Leak & Inerting Procedure Elaboration
- Leak Test Packs
- Pre-Commissioning & Commissioning Check-Lists & Test-Sheets Elaboration
- Commissioning On Site Activities (Piping, Pressure Vessels, Rotating Equipment)
- Status Index & SubSystems Boundaries Elaboration
- Project: Commissioning Assistance for OMV Well Pads
Company: OMV - Tunisia 2017
- On Site Commissioning Activities (Piping, Instrumentation, Safety)
- Commissioning Activities Follow-Up and Coordination (Between Disciplines and Company/Contractors)
- On Site Commissioning Activities (Piping, Instrumentation, Safety)
- Project: Commissioning and Start-Up Assistance Catalytic Reforming Unit at Tunisian Refinery
Company: STIR - Tunisia 2016
- Status Index & SubSystems Boundaries Elaboration
- Pre-Commissioning and Commissioning Procedure Elaboration
- Leak & Inerting Procedure Elaboration
- Leak Test Packs
- Pre-Commissioning & Commissioning Check-Lists & Test-Sheets Elaboration
- Commissioning On Site Activities (Piping, Rotating Equipment, Pressure Vessels, Fractionating Column, Direct Fired Heaters, Reactors)
- Status Index & SubSystems Boundaries Elaboration
- Project: EPCC - Trunk Line and Waha Reception Facilities
Company: OMV - Tunisia 2015-2016
- Pre-Commissioning and Commissioning Procedure Elaboration.
- Leak & Inerting Procedure Elaboration
- Leak Test Packs
- Pre-Commissioning & Commissioning Check-Lists & Test-Sheets Elaboration
- Pre-Commissioning and Commissioning Procedure Elaboration.
Mechanical & Piping Engineer
Alpha Engineering International
Since September 2015
Sousse
Tunisia
- Project: CPF Direct Fired Heater Upgrade
Company: MARETAP - Tunisia 2017
- SOW for Heater Mechanical Inspection
- SOW for Heater Mechanical Inspection
- Above Ground Welded Storage Tanks Design, Construction, Inspection and Repair API 650 & 653 Training for Tunisians Tanks Owners (ETAP, SNDP)
Tunisia - 17/04/2017 to 21/04/2017 - Project: Flow Lines Replacement Bids Technical Evaluation
Company: MARETAP - Tunisia 2017
- Technical Offer Evaluation for Flowlines Replacement
- Technical Offer Evaluation for Flowlines Replacement
- Project: Gas Lift Compressor Installation
Company: OMV - Tunisia 2017
- Gas Lift Compressor Installation SOW
- Process Tie-ins Identification
- Piping Arragement
- Piping MTO
- 3D Model Review
- Gas Lift Compressor Installation SOW
- Project: New Skimmer Installation
Company: OMV - Tunisia 2017
- Process Tie-ins Identification
- Skimmer Supply Specifications
- Piping Isometric Drawings
- Piping Arragement
- Piping MTO
- 3D Model Review
- Process Tie-ins Identification
- Project: Foundation Flatness Check for Gas Generator Installation
Company: OMV - Tunisia 2017
- Flatness Check Site Survey
- Flatness Check Report
- Flatness Check Site Survey
- Project: NFPA 20 Fire Fighting Pumps
Company: MARETAP- Tunisia 2017
- NFPA 20 Diesel & Electrical Fire Fighting Pump Specification
- NFPA 20 Diesel & Electrical Fire Fighting Pump TDS / IDS / RDDS
- NFPA 20 Diesel & Electrical Fire Fighting Pump Specification
- Project: Detail Engineering for Construction of new pipeline from Guebiba station to CFTP Station
Company: TPS - Tunisia 2015/2016/2017
Elaboration of:
- Pumps Technical Data Sheets and Supply Specifications
- Pig Traps Technical Data Sheets and Supply specifications
- Pipeline Trenching, Linning, Laying, Joint Coating, Welding and NDE Procedures
- Painting Specification
- Piping Arrangement, Isometric Drawings and MTO
- Piping and Pipeline Stress Analysis
- Pipeline Crossings Schedule
- Pumps Technical Data Sheets and Supply Specifications
- Project: Separators and Tanks Cold Repair
Company: MARETAP - Tunisia 2017
- Non Metallic Repair Scope Of Work
- Services Prices Schedule
- Non Metallic Repair Scope Of Work
- Project: Fire Fighting Pump Rental Specification
Company: MARETAP - Tunisia 2017
- Scope Of Work
- Services Prices Schedule
- Scope Of Work
- Project: Budgetary Estimation For Tanks and Flowlines Repair
Company: MARETAP - Tunisia 2016
- Damaged Flowlines Repair Budgetary Estimation
- Damaged Tanks Repair Budgetary Estimation
- Damaged Flowlines Repair Budgetary Estimation
- Project: Gas Pipeline Design Verification
Company: MARETAP - Tunisia 2016
- Pipeline Corrosion Rates and Remaining Life
- Thickness Verifications (API 5L and NT 109.01)
- Pipeline Calculation Note
- Pipeline Corrosion Rates and Remaining Life
- Project: Flexible Loading Hoses Specifications and Bids Evaluation Company: MARETAP - Tunisia 2016
- Flexible Hoses Technical Data Sheets and Supply Specifications
- ITT Documentaions
- Bids Evaluation and Technical Acceptance
- Flexible Hoses Technical Data Sheets and Supply Specifications
- Project: Gas Lift Compressors Upgrade
Company: OMV - Tunisia 2016
- Gas Lift Compressor Procurement and Installation SOW
- Services Prices Schedule
- Gas Lift Compressor Piping Installation Drawings
- Gas Lift Compressor Procurement and Installation SOW
- Project: Heat Exchanger Calculation Note Elaboration
Company: STIR - Tunisia 2016
- Shell and Tube Heat Exchanger Mechanical Calculation Note
- Thickness Verification Check
- Shell and Tube Heat Exchanger Mechanical Calculation Note
- Project: Engineering Documents update Company: TPS - Tunisia 2016
- As-Built Activities
- Update of TPS Stations Engineering Documents
- Flange Management Procedure and Budgetary Estimation
- P&ID Elaboration (as Design Engineer)
- As-Built Activities
- Project: Sour Water API 650 500 m3 Welded Tank Design
Company: AEC - Tunisia 2016
- API 650 Storage Tank Calculation Note
- Mechanical Drawings
- API 650 Storage Tank Calculation Note
- Project: Cherouq Flowlines Replacement Engineering
Company: OMV - Tunisia 2016
- Flowlines Construstion and Welding Specifications
- Flowlines MTO
- Contractors SOW and Prices Schedule
- Flowlines Construstion and Welding Specifications
- Project: Storage Tanks Piping Relocation (Fast Track)
Company: OMV - Tunisia 2016
- Stress Analysis
- ISO, Piping Arrangement and MTO
- Stress Analysis
- Project: Detail Engineering for Trunk Line and Waha Reception Facilities
Company: OMV - Tunisia 2015/2016
Elaboration of:
- Slug Catcher, KO Drum, Pumps, Flare System, Pig Traps Data Sheets and Supply Specifications
- Piping Arrangement, Isometric Drawings and MTO
- Piping and Pipeline Stress Analysis
- Slug Catcher, KO Drum, Pumps, Flare System, Pig Traps Data Sheets and Supply Specifications
- Project: Detail Engineering for Gathering System Phase II
Company: MVI - Tunisia 2015
- Flowlines Stress Analysis
- Construction Scope Of Work, Lump Sum, Equipment and Manpower Prices Schedule
- Anchor Flange, Barred Tee Technical Data Sheets
- Flowlines Stress Analysis
- Project: Centre Huile As-Built at El Borma Station
Company: SITEP - Tunisia 2015
- Plant As-Built Isometric Drawings Elaboration
- Plant As-Built P&ID Elaboration
- Plant 3D Model
- As-Built On Site Activities
- Plant As-Built Isometric Drawings Elaboration
- General Activities:
- Mechanical Department Quality Actions Tracking and Achievement
- Technical Offer Presentation
- Manhours Estimation
- Project Schedule Preparation
- Drawings Check and Comments
- Mechanical Department Quality Actions Tracking and Achievement
Mechanical Engineer
CFTP (Compagnie Franco-Tunisienne des Pétroles)
January 2015
to August 2015
SFAX
Tunisia
- Graduate Project
- FEED and Pre-Design of a Water Evaporator using the Heat dissipated by Gas Turbine Exhaust.
- Material Selection
- Piping Design (ASME B31.3, ASME B16.11, ASME B16.20)
- Pumps Selection (API 610)
- Tubular Heat Exchangers Design (ASME VIII Div.1, TEMA)
- Cost Estimation
- Feasability Study
- Material Selection
Engineering Preparatory Studies
IPEIEM (Institut Préparatoire aux Etudes d'Ingénieurs El Manar)
2010
to 2012
-
English: Fluent
Good
-
French: Fluent
Advanced
-
Arabic: Mother Tongue
Advanced
-
Italian: Mother Tongue
Advanced
- Storage Tanks: API 650, 12B, 653
- Pressure Vessel: ASME VIII Div. 1, API 510, RP 571, RP 572
- Pipeline: ASME B31.4, B31.8, API RP 1102, NT 109.01, 109.02
- Piping: ASME B31.3, B16.5, B16.11, B16.20, API 570
- Flexible Hoses: BS 1435, BS EN 1762
- Welding: ASME IX, API RP 577
- NDE: ASME V
- Materials: ASME II, ASTM, NACE
- FF Pumps: NFPA 20
- Pumps: API 610
- Compressors: API 618, 619
- OPERCOM®
- Pressure Vessels Inspection (API 510)
- Pre-Commissioning and Commissioning
- Piping & Pipeline Sizing
- Piping and Pipeline Stress Analysis
- Welded and Bolted Storage Tanks Design
- Pressure Vessels Design
-
AUTOCAD
Good
-
CADWORX PLANT
Good
-
CADWORX P&ID
Advanced
-
CADWORX EQUIPMENT
Advanced
-
NAVISWOKS
Good
-
CAESAR II
Advanced
-
PVELITE
Advanced
-
CATIA V5
Good
-
HTRI XCHANGER
Good
