sharad sawant
Rotating Equipment Engineer
44 years old
Driving License
Dubai (16472) United Arab Emirates
Professional Status
Employed
Available
About Me
I am 33 year old Indian Engineer;
I have worked and traveled
extensively over past 13 years in
the Oil and Gas industries. I
specialize in Rotating Equipment s
(Turbine, Compressors, Pumps,Winder, Reactor)
but also fully conversant with
Static Equipment and Heat
Exchanges.
I have in the past worked in
projects from EPC through setting
out, construction, commissioning
& start up and maintenance; I
have also been involved in FEED
and tenders focused on long lead
items.
I have worked and traveled
extensively over past 13 years in
the Oil and Gas industries. I
specialize in Rotating Equipment s
(Turbine, Compressors, Pumps,Winder, Reactor)
but also fully conversant with
Static Equipment and Heat
Exchanges.
I have in the past worked in
projects from EPC through setting
out, construction, commissioning
& start up and maintenance; I
have also been involved in FEED
and tenders focused on long lead
items.
Rotary Equipement in Engineering Plat Form
OWENS CORNING INDIA ltd
July 2001
to December 2004
Full-time
Mumbai
India
- Managing all the plant maintenance activities including condition monitoring and vibration analysis of rotating
equipments. - Responsible for the planning and execution of major overhauls on Turbines, Compressors, Pumps and other
plant rotating equipment. - Involved in root cause analysis (RCA) for the rotating equipment and solutions to the equipment reliability
problems - Experience in the development of maintenance strategies and procedures for rotating equipment
- Coordinate with OEM to resolve the problems and enhance the reliability of the equipment
- Prepare specifications and provide technical recommendations for procurement of major equipment
- Responsible for preparation of bid packages for major overhauls, pre qualification of contractors, scopes of
work and parts requirement - Helps in preparation of capital spares refurbishment requests for critical rotating machines in the plant
- Provide recommendations on spare parts requirement, to secure the most reliable operation and economic
level of maintenance - Excellent in SAP PM and MM modules
- Good knowledge on MS Projects and Primavera P6
- Familiar with various codes, standards and procedures like API, ASME, and ASNT
Rotating Equipment Engineer
Innovassynth Technologies India Ltd
January 2005
to May 2007
Full-time
Mumbai
India
- Work experience in troubleshooting, overhauling and repair of all plant rotating equipment
- Acted as technical consultant for planners, maintenance supervisors and operation supervisors in developing
methods for maintenance work execution and/or planning such work - Preventive and Predictive Maintenance program set up and execution
- Order materials, with purchasing department assistance, that are not routine or maintained as stock items for
maintenance and operations - Interacting with OEM for spares
- Prepare technical reports as required
- Thorough knowledge on API codes related to rotary machines
Rotating Equipment Engineer (Installation and commissioning)
Transparent Energy Services Pvt Ltd
January 2007
to June 2010
Full-time
Pune
India
- Installation and Pre Commissioning of GE Frame 9 Gas Turbines (MS 9001E) and Nuovo Pignone Compressors
- Reviewing, executing functional, and pre commissioning test procedures, Co-ordination, and supervision of
field Engineers and Technicians - Attending daily Mechanical meeting and submitting the daily progress report to Rotating Equipment Manager.
and Interfaces with other disciplines and third parties - Fully involved in various pre-commissioning activities such as Steam/ Air blowing, Lube oil flushing, Turbine,
Compressor and Pump – mechanical runs and solo runs. - Inspecting various parameters such as Vibration, Bearing temperature, Sound, RPM, and Alignment Checks
Experience in Boroscopic inspection (Everest XLG3 and Olympus IPLEX) - Experience in Various API Standards and Recommended practices like API 610, 611, 612, 614, 616, 617, 686 etc
- Enforcing to follow HSE procedures, Daily Tool Box talk, Task Site Instruction for sub contractors
Rotating Equipment Engineer
FLOWLINES TECHNOLOGY LLC ( sub contractor for Hyundai construction and projects)
Since August 2010
Full-time
Dubai
United Arab Emirates
- Managing all the plant maintenance activities including condition monitoring and vibration analysis of rotating
equipment. - Responsible for the planning and execution of major overhauls on Turbines, Compressors, Pumps and other
plant rotating equipment. - Involved in root cause analysis (RCA) for the rotating equipment and solutions to the equipment reliability
problems - Experience in the development of maintenance strategies and procedures for rotating equipment
- Coordinate with OEM to resolve the problems and enhance the reliability of the equipment
- Prepare specifications and provide technical recommendations for procurement of major equipment
- Responsible for preparation of bid packages for major overhauls, pre qualification of contractors, scopes of
work and parts requirement - Helps in preparation of capital spares refurbishment requests for critical rotating machines in the plant
- Provide recommendations on spare parts requirement, to secure the most reliable operation and economic
level of maintenance - Excellent in SAP PM and MM modules
- Good knowledge on MS Projects and Primavera P6
- Familiar with various codes, standards and procedures like API, ASME, and ASNT
- Nuovo Pignone BCL, 2BCL and MCL, Centrifugal Compressors
- John Crane, Flowserve, Burgmann Dry Gas Seals
- GE Frame 9 Gas Turbines
- Air compressor (ATLAS Copco, Ingersoll Rand screw type and reciprocating both
- Chillers (Mc Quay, Blue star )
- Boilers and thermic Fluid ( Thermax ), Package type and duct type air conditioning system, piping system, valve, Blower. D.M.Water Plant, Cooling Tower.
- Chemical Rotary process Equipments:- Reactors, Pumps, Waste water system, Agitator, Heat Exchangers,
- Maintenance & Troubleshooting in FIBRE GLASS (Owens Corning India LTD):-Batch house equipments, Roving winder, Cake Oven Equipments, CSM line
- Forming Winders (Big John, T30, Quad and DS), T30 Machines, Ducs, SMELTER(FURNACE) (Recuperative tank oil fired furnace with electrical boost), heavy belt conveyor and mechanical drives, like gear boxes, chain drives
- Steam Turbine Maintenance - SABIC
- Centrifugal Pumps Overhauling - SABIC
- Safety Training – Technip
- Process Hazard - ABS
- User training in SAP PM and MM modules SABIC
- SAP R-3 System Implementation Program
- Festo Pneumatic Training, Mechatronics LLC, Dubai
- Total Quality Team Seminar
- Industrial Safety
- Kaizan
- Stress management
- First Aid and fire fighting
- Basic and Advance Excel
- Presentation skills
- O H S A S 18001, ISO 14001 environment Policy, ISO 9001
- SIX SIGMA GREEN BELT AND BLACK BELT
- PROJECT MANAGEMENT
- VIBRATION ANALYSIS
- Theory of Bearing
- Lubrication
- Done energy saving projects- lifting fuzz collector fan
- Done project on inventory control and spare parts consumption
- Refractory changing project in make parallel line to glass flow
- Done the project and excution of Propane gas ,LDO and LDHS pipping modification to get better achievement in consumption of Propane gas.
- Fluent in English
- Multicultural Supervision
- Middle East Experience
- Permit to Work.
- HAZOP.
- Job Safety Analysis.
- Risk Assessment.
- Working at Heights.
- Confined Space
- Knowledge of Management information and documents system: - SAP R3 in plant maintenance, (INCLUDING NOTIFICATION TRACTIONS LIKE IW29,PURCHASE REQUISITION me51n, me52n,me 53n work order iw31 etc)
- Windows and Office Tools - MS Office
- Programming Languages - C, Basic and FORTRAN
- Engineering Application - AutoCAD , Primavera P6 and SAP
