Mohammad Naser
Resume
36 years old
Driving License
zarqa Jordan
Professional Status
Employed
Available
Senior Welding Engineer & Senior QA/QC Engineer
SEPCO III Shandong Electric Power Construction Corp.
Since February 2017
- Working as a Senior Welding Engineer & Senior QA/QC Engineer to issue and qualify all project WPS’s PQR’s WPQ’s also issue all types of MS for welding and fabrication and to monitor all welding & testing activities and the construction of 3x NEM HRSGs, 3xGE 9E Gas Turbine 1x Siemens Steam Turbine 9x storage tanks, ACC & BOP, and provide site technical support and prepare all kind of reports & KPIs and supervising QC personnel at the construction site and assure that all site quality measurements are acquired. With.
Senior Quality Control Engineer
MiD ANC Joint Venture Construction Co.
February 2016
to December 2016
- Working as a Senior Quality Control Engineer, to provide site technical support and prepare all kind of reports & KPIs and supervising QC personnel at the construction site and assure that all site quality measurements are acquired. With.
HRSG Boiler Senior Inspector
ASTRACO
February 2014
to January 2016
Jordan
- Working as a HRSG Boiler Senior Inspector & ACC unit Inspector & responsible for all the reports and tests and qualifications and preparing the ASME Stamp documents "S, A, PP, R" for the ASME Authorized Inspector & preparing Hydrostatic test packages and walk downs.
- Also preparing all the NDT procedures and WPS, PQR, WPQ & issuing all types of requests for inspection and extra works and supervise a team of QC inspectors.
- Working as Senior QA/QC Mechanical Inspector, to inspect and report all the activates at the site preparing hydro test packages and tests also preparing and conducting light test for HVAC systems also the same for Firefighting system and chilled water, checking that all ducting and piping works are maintained as per the drawings, also issuing inspection requests and turn over packages for all MEP works and keeping all logs and records updated.
QA/QC Engineer & TPI
Experts Industrial Testing Services
January 2013
to January 2014
- Working as QA/QC Engineer & TPI
NDT Engineer
NATIONAL COMPANY FOR INSPECTION
December 2010
to July 2012
- Performing the multi NDT engineer testing methods such as RT.UT.PT.MT.VT.
-
Preparing All the NDT procedures as per as ASME V.
Radiographic test for any type of joints. - Interpretation RT films with Any Specific Code.
- Magnetic Particles Test with AC & DC Yoke.
- Dye penetrant test water washable & solvent remover.
- Vacuum box test for tanks floors.
- Ultrasonic test Thickness measurement & Shear weave with AWS & DAC.
- WPS – PQR – WPQ Preparation and qualification.
- Using any type of the welding gauges professionally.
- Visual inspect any type of weld and fabrication and assembly.
- Evaluate the results of the inspection process with any specific code.
- Aware with API 1104 Code and AWS D1.1 Structural Code & ASME V, VIII D1 & API 650, ASME B31.1, ASME B31.3, ASME I, ASME IX, ASME II, EN Standards, ASTM Material Specs,
- Writing Reports with Any Specific Code.
- Preparing RFIs for any inspection from the ITP.
- Dealing with codes and ITPs professionally.
- Preparing welding maps for piping isometrics and storage tank as per any specific code.
- Prepare procedures and control & monitor pre-heating and PWHT processes for all types of materials.
- Visual Test for surface Preparation.
- Perform pull off test.
- Control the touch up process for the damage areas.
- Checking the paint application and the number of layers.
- Perform Dry Film Thickness.
- Perform Holiday Test to insure the isolation of the paint.
- Ensure that all necessary inspections as identified in the approved Inspection and Test Plan (ITP) are attended by a suitable QA/QC inspector
- Ensure that the production quality being offered for inspection meets the client requirements.
- Ensure that all deviations from the Project Quality Program and the Company Integrated Management System (IMS) are documented and recorded.
- Ensure that the quality system is updated with any and all deviations from the Project Quality Program and the Company Integrated Management System (IMS).
- Coordinate with the client representative to ensure inspections are carried expediently.
- Coordinate the generation of client Requests for Inspections (RFI) where required providing sufficient notice for Hold, witness and inspection Points.
- Ensure that inspections are carried out for the closure of Exception Items (EI) as documented in the QP and sign off as closed when activity is complete.
- Ensure that surveillance inspections are continually carried out on the project recording and documenting any and all deviations from the Project Quality Program and the Company Integrated Management System (IMS).
- Review the calibration status of any test equipment being utilized on the project.
- Provide support and advice to the construction personnel in relation to Project Quality
- Program and the Company Integrated Management System (IMS).
- Maintain a good working relationship with all Client personnel.
- Maintain good record keeping of activities carried out and inspection reports, surveillance reports, etc.
- Attend and participate in all required client and company meetings
- Ensure that all project audits are carried out in accordance with the project Audit Schedule and the schedule is up to date.
- Follow up on all audit findings ensuring that action is taken and reoccurrence is minimized.
- Coordinate with the client to obtain approval on the project IMS Program, and incorporate comments as necessary.
- Continually review the project IMS Program to ensure that all necessary amendments are carried out and the document is up to date.
- Prepare and submit ITP’s, WP’s, Method Statements, etc. as required on the project.
- Coordinate the client approval of client QA/QC personnel where required.
- Prepare and issue all necessary weekly and monthly reports.
- Actively promote the use and implementation of the client IMS.
- Review QA/QC inspector performance and report findings to Country QA/QC Manager, where necessary initiate training to augment their skills.
- Maintain all project logs as up to date e.g. NCR/Improvement Log, Customer Feedback Log.
- Ensure that follow up is carried out on all open issues pertaining to the IMS and report any open issues to the Project Manager and Country QA/QC Manager.
- Ensure all quality records are maintained, up-to date, traceable and retrievable.
- Provide adequate on the job training for Trainee inspectors.
- Carry out all necessary IMS inductions.
- Comply with all Project HSE requirements i.e. PPE, work Permits etc.
- Promote the use HSE practices.
-
German
Good
-
english (fluent)
Expert
-
Arabic Fluent
Expert
Installation & Inspection of boiler, pressure vessel & Pressure piping inspector
