Huseyin Anil Sungurtas

Resume created on DoYouBuzz

Experiences

Junior Mechanical Engineer

UTP University of Science and Technology

July 2018 to November 2018

Internship

Bydgoszcz

Poland

Training period for 5 months at UTP in Poland. Working on design, testing, drawings 2D/3D, preparing samples for cutting.
I designed elastic damper like air valve and i made mold for it also this damper has a two tube for controlling pressure so i made mold for it. Also i designed pneumatic walve membran, old one has a damaged thats why companies need new and strong one. Firstly i tested materials with tensile testing device after i designed pneumatic walve membran and i made accordingly mold.

.
1-) B500SP Steel with various diameters

Samples are places into appropriate pulling test machine and required numbers are typed in.
Frequence numbers are set in accordance to diameters of samples and it is left for test. Entirity
of the test lasts about 24 hours, depending on the durability of product samples.

.
2-) Rubber Valve

In our University’s R&D activities, desing and planning of Rubber Valve project were completely carried out by us. As previous test, requireds samples are taken into the pulling test machine. In result, with the aid of graphics in excel, the thickness of rubber valve has been determined.

.
3-) Durability test of samples taken from an old bridge ın Warsaw

Samples taken from the bridge in the capital of Poland, Warsaw, are converted into digital drawings and prepared for cutting by CNC machine. There was no detailed information about the durability of bridge and it has been build 70 years before. So, 12 instances of each sample are put to test. After pressure and pulling tests, results are noted. Results showed that bridge was solid.

.
4-) High-Quality Composite Construction Steel Durability Test

A company producing high-quality construction steel has sent samples of their product to test their durability for getting certificate of standards. According to test results, durability of high-quality composite steel checks but flexibility is significantly less. Cracks occur swiftly due to deformation of plastic in the substance.

.
5-) Hardness Test of some parts from a Tractor

After removing the painting on Tractor parts, each part was put to hardness test. Samples are places no a solid ground and then with the device shown in the picture, their hardness were tested. As measurement method, Brinell Hardness Measurement method was followed.

.
6-) Hot pressing and pulling test

Parts that require to work under hot environment are heated to very hot degrees(700°C). Field of use of the part determines the type of test whether it is pressure test or pulling test. Samples are to work under pressure, so they are put to the pressure test. During the test, we put constant pressure on the sample to the point it reaches the maximum heat of 700°C and waited a bit longer. After it cools down to room temperature, we measured how much it squeezed. Recycling the same procedure for 3 times, numbers are taken into consideration and approximate digits are reported.

.
7-) Windshield Durability Test

Samples received from various companies were put to buth pressure and pulling test. Initial procedure is for measuring the durability but the second part of the test is to investigate the connection inbetween the windshield and the frame. Test results showed that samples were not appropriate for use.

Organise the storage and distribution of goods. Ensure that the right products are delivered to the right location on time and at a good cost. Therefore contact to customers and trucks driver often times. Responsible for finding solutions about problems of vehicles, route, customers wishes, any kinds of transport system and also responsible for planning new route. Therewithal interview with Turkish candidate workers.

Learn more

Responsible for sales and marketing of medical examination kind of checkup.
Carry out all kinds of sales marketing and promotion activities.
Providing the customer services functions.

Education

Cumulative Grade Point Average: 3,29 out of 4.00 ( Honor Student)

Regenerative Braking Systems in Hybrid Vehicles - Final Thesis

Heating System Design

Using Lathe, Milling, Drill Machines

Programming CNC Machines

Corrosion Analysis of Steel Specimen

I have been in Bydgoszcz Poland for 1 year because of Erasmus+ Student Exchange Program.

The effect of the safety belt in the vehicle at the speed of 25 Km- Tested

The effect of the safety belt in the vehicle at the tumble position- Tested

Analysis and repair of 6-cylinder engine

Airbag reaction at the time of the accident

Corkscreew designed and manufacturing

Building Robot with Legos and using EV3 PROGRAMMER

I learned Matlab, AutoCad, SolidWorks, And i made Basicly Calculator of Matrix and Determinant in Matlab.

I designed Fork Arms in SolidWorks.

And also i attended Farabi Student Exchange Program to Uludağ University thats why I studied in Uludağ University for one year.

GPa: 73.19

Language: English

Skills

Solidworks

Expert
AutoCAD

Expert
Matlab

Good
Ansys

Good
Ms Office

Expert
Communication, Team Works

Expert

English

Expert
Turkish

Expert
Polish

Intermediate
Azerbaijani

Good

Interests

I've been in 17 countries and many of cities. These;

Austria, Czech Republic, Poland, Norway, Ukraine, Moldova, Romania, Hungary, Germany, Bulgaria, Italy, Malta, Spain, Netherlands, Vatican, Morocco, France.

Making Camp, Travelling, Climbing

Your browser is outdated!

Mechanical Engineer

Junior Mechanical Engineer

Logistics And Distribution Advisor

Call Centre Advisor

Master

Bilecik Seyh Edebali University

University

Bilecik Seyh Edebali University

University

UTP University Of Science And Technology

University

Erzurum Technical University

High School

Çanakkale Biga Anatolian High School

Skills

Languages

Travel

Social Activities