Gino Blyweert
Offshore industrial.
60 years old
Driving License
Nantong (226000) China
Consultant
Available
I am currently searching for new opportunities on rotational basis. Position on drill ship semi-sub or Jack-up. Location preferably Asian Region or Africa.
I am immediately available. Willing to work through Agency or under direct contract.
Introduction career summary:
Started as a Marine Engineer in the Navy. For 15 years and was working from Assistant Engineer up till position of Chief Engineer on different Oil- and Chemical Tankers. Held the position of Marine Engineer on Drills Ships. Conducted three (3) projects as Assistant Technical Section Leader up till position of Section Leader for Tension Leg Platforms and DP Drillship sixed (6) generation from construction side until finished first drilling program. Responsible for the Drilling and Marine Equipment. Currently senior surveyor with duties such as: Acceptance Test, Condition Survey, Drops Object Surveys, and Assessments for Personal, Safety, Equipment and Management systems for different type of platforms, such as Landrigs, Jack-ups, Drillships and Semi Subs.
Ship Yard and factory audits:
Singapore: Sambawang
China: Dalian
China: Chengdou
China: Baouji
Carry out audit to determine the present progress of the planned work scopes. Included reports based on a review and assessment of the project including scheduling, budgets, contract status, project management, technical specifications and manuals, certification, verification of equipment standards and workmanship.
Currently live in China with Permanente Residence.
Chinese driver license.
Work permit and work license.
I am immediately available. Willing to work through Agency or under direct contract.
Introduction career summary:
Started as a Marine Engineer in the Navy. For 15 years and was working from Assistant Engineer up till position of Chief Engineer on different Oil- and Chemical Tankers. Held the position of Marine Engineer on Drills Ships. Conducted three (3) projects as Assistant Technical Section Leader up till position of Section Leader for Tension Leg Platforms and DP Drillship sixed (6) generation from construction side until finished first drilling program. Responsible for the Drilling and Marine Equipment. Currently senior surveyor with duties such as: Acceptance Test, Condition Survey, Drops Object Surveys, and Assessments for Personal, Safety, Equipment and Management systems for different type of platforms, such as Landrigs, Jack-ups, Drillships and Semi Subs.
Ship Yard and factory audits:
Singapore: Sambawang
China: Dalian
China: Chengdou
China: Baouji
Carry out audit to determine the present progress of the planned work scopes. Included reports based on a review and assessment of the project including scheduling, budgets, contract status, project management, technical specifications and manuals, certification, verification of equipment standards and workmanship.
Currently live in China with Permanente Residence.
Chinese driver license.
Work permit and work license.
3 years Marine Chief Engineer unlimited power.
Details and Extracurriculars
- STCW 95 Chief Engineer Officer
Helicopter Underwater Escape Training with Emergency Breathing System.
Details and Extracurriculars
- Approved by Falck Nutec for 48 Months
Covering following items:
*Witnessing of factory acceptance tests at the manufacturer's factory or test facility.
*Witnessing of electrical tests on site, for example on board a ship, in shipyard or on an oil rig as part of rail installation.
*The witnessing of site acceptance tests on a project work site.
*The use of outdoor portable tools and electrical equipment.
*Witnessing of factory acceptance tests at the manufacturer's factory or test facility.
*Witnessing of electrical tests on site, for example on board a ship, in shipyard or on an oil rig as part of rail installation.
*The witnessing of site acceptance tests on a project work site.
*The use of outdoor portable tools and electrical equipment.
Introduction course for the lifting appliances training course. for Marine / Energy Surveyors.
Covers the following subjects:
*Ships / Platform to shore transfers, either by boat, basket or helicopter.
*Sea trails.
*Surveys and Inspections offshore.
*Surveys at sea.
*Tank rafting.
*Dead-weight measurements.
*Load Line verification.
*Damage and repair surveys / inspections
*Ships / Platform to shore transfers, either by boat, basket or helicopter.
*Sea trails.
*Surveys and Inspections offshore.
*Surveys at sea.
*Tank rafting.
*Dead-weight measurements.
*Load Line verification.
*Damage and repair surveys / inspections
In accordance with OSHA regulations, 29 CFR 1910 and 1926 and ANSI Standard Z390.1 Also know as H2S certification.
General awareness of radiation, where it is found, avoiding exposure and the potential effects of uncontrolled or excessive exposure.
Essential requirements of safety management system, how to report an incident, making safe decisions and choices for health and well being.
Danger of working in extreme heat with the awareness of the risks and the choices made to ensure of keep safe, prevent the effects of extreme heat on the body and what to do in emergencies.
Responsibilities when systems pressure testing. Assessing the risk and taking the right action. Hazards and controls.
Awareness of the hazards we face at work and be mindful of the potential consequences of any related incidents.
Classification and labeling of chemicals and recognize the symbols and what they mean. Understanding of data sheets and safety advice. This to prevent injury from exposure to hazardous chemicals.
Identify asbestos hazards and take appropriate action. Understand and describes different types and where might be find in the industry.
Ethics and values which apply international regulations and new UK Bribery Act.
internet based tracking tool that is widely used by oil companies, drilling companies and helicopter operators in UK waters and increasingly used for offshore work in Ireland, Denmark and the Netherlands.
Covering responsibilities when working at height included assessing the risk and taking the right action, checking and fitting PPE, what to do in emergencies.
Details and Extracurriculars
- Confirm Lloyds Register requirements of safety training.
LR Golden Rules
Responsibilities for confined space entry
Risk assessment
Hazard identification
Control methods
PPE (Personal Protection Equipment)
Emergency arrangements and rescue
Responsibilities for confined space entry
Risk assessment
Hazard identification
Control methods
PPE (Personal Protection Equipment)
Emergency arrangements and rescue
